; *** Inno Setup version 2.0.8+ English messages ***
;
; To download user-contributed translations of this file, go to:
; http://www.jrsoftware.org/is3rdparty.htm
;
; Note: When translating this text, do not add periods (.) to the end of
; messages that didn't have them already, because on those messages Inno
; Setup adds the periods automatically (appending a period would result in
; two periods being displayed).
;
; $Id: Default.isl,v 1.15 2001/07/06 23:03:58 jr Exp $
[LangOptions]
LanguageName=English
LanguageID=$0409
; If the language you are translating to requires special font faces or
; sizes, uncomment any of the following entries and change them accordingly.
;DialogFontName=MS Shell Dlg
;DialogFontSize=8
;DialogFontStandardHeight=13
;TitleFontName=Arial
;TitleFontSize=29
;WelcomeFontName=Verdana
;WelcomeFontSize=12
;CopyrightFontName=Arial
;CopyrightFontSize=8
[Messages]
; *** Application titles
SetupAppTitle=Setup
SetupWindowTitle=Setup - %1
UninstallAppTitle=Uninstall
UninstallAppFullTitle=%1 Uninstall
; *** Icons
DefaultUninstallIconName=Uninstall %1
; *** Misc. common
InformationTitle=Information
ConfirmTitle=Confirm
ErrorTitle=Error
; *** SetupLdr messages
SetupLdrStartupMessage=This will install %1. Do you wish to continue?
LdrCannotCreateTemp=Unable to create a temporary file. Setup aborted
LdrCannotExecTemp=Unable to execute file in the temporary directory. Setup aborted
; *** Startup error messages
LastErrorMessage=%1.%n%nError %2: %3
SetupFileMissing=The file %1 is missing from the installation directory. Please correct the problem or obtain a new copy of the program.
SetupFileCorrupt=The setup files are corrupted. Please obtain a new copy of the program.
SetupFileCorruptOrWrongVer=The setup files are corrupted, or are incompatible with this version of Setup. Please correct the problem or obtain a new copy of the program.
NotOnThisPlatform=This program will not run on %1.
OnlyOnThisPlatform=This program must be run on %1.
WinVersionTooLowError=This program requires %1 version %2 or later.
WinVersionTooHighError=This program cannot be installed on %1 version %2 or later.
AdminPrivilegesRequired=You must be logged in as an administrator when installing this program.
SetupAppRunningError=Setup has detected that %1 is currently running.%n%nPlease close all instances of it now, then click OK to continue, or Cancel to exit.
UninstallAppRunningError=Uninstall has detected that %1 is currently running.%n%nPlease close all instances of it now, then click OK to continue, or Cancel to exit.
; *** Misc. errors
ErrorCreatingDir=Setup was unable to create the directory "%1"
ErrorTooManyFilesInDir=Unable to create a file in the directory "%1" because it contains too many files
; *** Setup common messages
ExitSetupTitle=Exit Setup
ExitSetupMessage=Setup is not complete. If you quit now, the program will not be installed.%n%nYou may run the Setup program again at another time to complete the installation.%n%nExit Setup?
AboutSetupMenuItem=&About Setup...
AboutSetupTitle=About Setup
AboutSetupMessage=%1 version %2%n%3%n%n%1 home page:%n%4
AboutSetupNote=
; *** Buttons
ButtonBack=< &Back
ButtonNext=&Next >
ButtonInstall=&Install
ButtonOK=OK
ButtonCancel=Cancel
ButtonYes=&Yes
ButtonYesToAll=Yes to &All
ButtonNo=&No
ButtonNoToAll=N&o to All
ButtonFinish=&Finish
ButtonBrowse=&Browse...
; *** Common wizard text
ClickNext=Click Next to continue, or Cancel to exit Setup.
ClickNextModern=Click Next to continue, or Cancel to exit Setup.
BeveledLabel=
; *** "Welcome" wizard page
WizardWelcome=Welcome
WelcomeLabel1=Welcome to the [name] Setup Wizard
WelcomeLabel2=This will install [name/ver] on your computer.%n%nIt is strongly recommended that you close all other applications you have running before continuing. This will help prevent any conflicts during the installation process.
; *** "Password" wizard page
WizardPassword=Password
PasswordLabel1=This installation is password protected.
PasswordLabel3=Please provide the password, then click Next to continue. Passwords are case-sensitive.
PasswordEditLabel=&Password:
IncorrectPassword=The password you entered is not correct. Please try again.
; *** "License Agreement" wizard page
WizardLicense=License Agreement
LicenseLabel=Please read the following important information before continuing.
LicenseLabel1=Please read the following License Agreement. Use the scroll bar or press the Page Down key to view the rest of the agreement.
LicenseLabel2=Do you accept all the terms of the preceding License Agreement? If you choose No, Setup will close. To install [name], you must accept this agreement.
; *** "Information" wizard pages
WizardInfoBefore=Information
InfoBeforeLabel=Please read the following important information before continuing.
InfoBeforeClickLabel=When you are ready to continue with Setup, click Next.
WizardInfoAfter=Information
InfoAfterLabel=Please read the following important information before continuing.
InfoAfterClickLabel=When you are ready to continue with Setup, click Next.
; *** "Select Destination Directory" wizard page
WizardSelectDir=Select Destination Directory
SelectDirDesc=Where should [name] be installed?
SelectDirLabel=Select the folder where you would like [name] to be installed, then click Next.
DiskSpaceMBLabel=The program requires at least [mb] MB of disk space.
ToUNCPathname=Setup cannot install to a UNC pathname. If you are trying to install to a network, you will need to map a network drive.
InvalidPath=You must enter a full path with drive letter; for example:%nC:\APP
InvalidDrive=The drive you selected does not exist. Please select another.
DiskSpaceWarningTitle=Not Enough Disk Space
DiskSpaceWarning=Setup requires at least %1 KB of free space to install, but the selected drive only has %2 KB available.%n%nDo you want to continue anyway?
BadDirName32=The directory name cannot include any of the following characters after the colon:%n%n%1
DirExistsTitle=Directory Exists
DirExists=The directory:%n%n%1%n%nalready exists. Would you like to install to that directory anyway?
DirDoesntExistTitle=Directory Does Not Exist
DirDoesntExist=The directory:%n%n%1%n%ndoes not exist. Would you like the directory to be created?
; *** "Select Components" wizard page
WizardSelectComponents=Select Components
SelectComponentsDesc=Which components should be installed?
SelectComponentsLabel2=Select the components you want to install; clear the components you do not want to install. Click Next when you are ready to continue.
FullInstallation=Full installation
; if possible don't translate 'Compact' as 'Minimal' (I mean 'Minimal' in your language)
CompactInstallation=Compact installation
CustomInstallation=Custom installation
NoUninstallWarningTitle=Components Exist
NoUninstallWarning=Setup has detected that the following components are already installed on your computer:%n%n%1%n%nDeselecting these components will not uninstall them.%n%nWould you like to continue anyway?
ComponentSize1=%1 KB
ComponentSize2=%1 MB
ComponentsDiskSpaceMBLabel=Current selection requires at least [mb] MB of disk space.
; *** "Select Additional Tasks" wizard page
WizardSelectTasks=Select Additional Tasks
SelectTasksDesc=Which additional tasks should be performed?
SelectTasksLabel2=Select the additional tasks you would like Setup to perform while installing [name], then click Next.
ReadyMemoTasks=Additional tasks:
; *** "Select Start Menu Folder" wizard page
WizardSelectProgramGroup=Select Start Menu Folder
SelectStartMenuFolderDesc=Where should Setup place the program's shortcuts?
SelectStartMenuFolderLabel=Select the Start Menu folder in which you would like Setup to create the program's shortcuts, then click Next.
NoIconsCheck=&Don't create any icons
MustEnterGroupName=You must enter a folder name.
BadGroupName=The folder name cannot include any of the following characters:%n%n%1
NoProgramGroupCheck2=&Don't create a Start Menu folder
; *** "Ready to Install" wizard page
WizardReady=Ready to Install
ReadyLabel1=Setup is now ready to begin installing [name] on your computer.
ReadyLabel2a=Click Install to continue with the installation, or click Back if you want to review or change any settings.
ReadyLabel2b=Click Install to continue with the installation.
ReadyMemoDir=Destination directory:
ReadyMemoType=Setup Type:
ReadyMemoComponents=Selected Components:
ReadyMemoGroup=Start Menu folder:
; *** "Installing" wizard page
WizardInstalling=Installing
InstallingLabel=Please wait while Setup installs [name] on your computer.
; *** "Setup Completed" wizard page
WizardFinished=Setup Completed
FinishedLabelNoIcons=Setup has finished installing [name] on your computer.
FinishedLabel=Setup has finished installing [name] on your computer. The application may be launched by selecting the installed icons.
ClickFinish=Click Finish to exit Setup.
FinishedRestartLabel=To complete the installation of [name], Setup must restart your computer. Would you like to restart now?
FinishedRestartMessage=To complete the installation of [name], Setup must restart your computer.%n%nWould you like to restart now?
ShowReadmeCheck=Yes, I would like to view the README file
YesRadio=&Yes, restart the computer now
NoRadio=&No, I will restart the computer later
; used for example as 'Run MyProg.exe'
RunEntryExec=Run %1
; used for example as 'View Readme.txt'
RunEntryShellExec=View %1
; *** "Setup Needs the Next Disk" stuff
ChangeDiskTitle=Setup Needs the Next Disk
SelectDirectory=Select Directory
SelectDiskLabel2=Please insert Disk %1 and click OK.%n%nIf the files on this disk can be found in a folder other than the one displayed below, enter the correct path or click Browse.
PathLabel=&Path:
FileNotInDir2=The file "%1" could not be located in "%2". Please insert the correct disk or select another folder.
SelectDirectoryLabel=Please specify the location of the next disk.
; *** Installation phase messages
SetupAborted=Setup was not completed.%n%nPlease correct the problem and run Setup again.
EntryAbortRetryIgnore=Click Retry to try again, Ignore to proceed anyway, or Abort to cancel installation.
ErrorRegWriteKey=Error writing to registry key:%n%1\%2
; *** INI errors
ErrorIniEntry=Error creating INI entry in file "%1".
; *** File copying errors
FileAbortRetryIgnore=Click Retry to try again, Ignore to skip this file (not recommended), or Abort to cancel installation.
FileAbortRetryIgnore2=Click Retry to try again, Ignore to proceed anyway (not recommended), or Abort to cancel installation.
SourceIsCorrupted=The source file is corrupted
SourceDoesntExist=The source file "%1" does not exist
ExistingFileReadOnly=The existing file is marked as read-only.%n%nClick Retry to remove the read-only attribute and try again, Ignore to skip this file, or Abort to cancel installation.
ErrorReadingExistingDest=An error occured while trying to read the existing file:
FileExists=The file already exists.%n%nWould you like Setup to overwrite it?
ExistingFileNewer=The existing file is newer than the one Setup is trying to install. It is recommended that you keep the existing file.%n%nDo you want to keep the existing file?
ErrorChangingAttr=An error occured while trying to change the attributes of the existing file:
ErrorCreatingTemp=An error occured while trying to create a file in the destination directory:
ErrorReadingSource=An error occured while trying to read the source file:
ErrorCopying=An error occured while trying to copy a file:
ErrorReplacingExistingFile=An error occured while trying to replace the existing file:
ErrorRestartReplace=RestartReplace failed:
ErrorRenamingTemp=An error occured while trying to rename a file in the destination directory:
ErrorRegisterServer=Unable to register the DLL/OCX: %1
ErrorRegisterServerMissingExport=DllRegisterServer export not found
ErrorRegisterTypeLib=Unable to register the type library: %1
; *** Post-installation errors
ErrorOpeningReadme=An error occurred while trying to open the README file.
ErrorRestartingComputer=Setup was unable to restart the computer. Please do this manually.
; *** Uninstaller messages
UninstallNotFound=File "%1" does not exist. Cannot uninstall.
UninstallUnsupportedVer=The uninstall log file "%1" is in a format not recognized by this version of the uninstaller. Cannot uninstall
UninstallUnknownEntry=An unknown entry (%1) was encountered in the uninstall log
ConfirmUninstall=Are you sure you want to completely remove %1 and all of its components?
OnlyAdminCanUninstall=This installation can only be uninstalled by a user with administrative privileges.
UninstallStatusLabel=Please wait while %1 is removed from your computer.
UninstalledAll=%1 was successfully removed from your computer.
UninstalledMost=%1 uninstall complete.%n%nSome elements could not be removed. These can be removed manually.
UninstallDataCorrupted="%1" file is corrupted. Cannot uninstall
; *** Uninstallation phase messages
ConfirmDeleteSharedFileTitle=Remove Shared File?
ConfirmDeleteSharedFile2=The system indicates that the following shared file is no longer in use by any programs. Would you like for Uninstall to remove this shared file?%n%nIf any programs are still using this file and it is removed, those programs may not function properly. If you are unsure, choose No. Leaving the file on your system will not cause any harm.
